MRF 20L Mahogany Red Solvent Based Wood Stain, V246

India

20 L

Interior

Application Method: Brush, Spray & Rag

Applications: Sand The Surface of the Wood Using Open Coated Aloxite Sand Paper of Grit 120 Along The Grains of The Wood for Hard Woods, It Might Be Necessary to Sand Using a Coarse Grit Such as 80

Wet The Surface Using a Damp Cloth Allow the Water to Soak Into the Grains Once the Grains Have Swollen to the Maximum, Sand Again Using Open Coated Aloxite Sand Paper Grit 120 Along the Grain

Allow to Dry & Sand Using Open Coated Aloxite Sand Paper of Grit 180 Along the Grain

Use The Wood Stain Directly to Attain a Dark Tone Dilute with Suitable Thinner (Nc Or Pu Thinner Depending on The Top Coat) to Get a Lighter Tone Soak A Cotton Rag In The Wood Stain Wipe the Wood Surface with the Rag Along the Grain with a Smooth Sweeping Motion

Make Sure Not to Place the Rag at One Spot for Too Long This Will Lead to a Patchy Finish

The Coating System Can Be Applied Once the Stain Has Dried for 4-6 Hours, Depending on the Ambient Conditions of Temperature & Humidity

V246

Mahogany Red