Dr. Fixit 20L Terracotta Roofseal Select Waterproofing Additive, 653

India

Stir Well Prior to Application All Joints, Corners, Drainage Outlets & Penetration Points Shall Be Treated Prior to All Application of Dr. Fixit Roofseal Select. All Corners, Gaps, Joints, Protrusions & Outlets Should Be Coated with an Extra Coat Incorporating Reinforcing Fabric

To Ensure Proper Adhesion Surface Should Prime with a Single Coat of Dr. Fixit Prime seal Dilute with Water in the Ratio 2:1 Spreading At The Rate of 8-10 sq.mt per ltr Substrate Must Be in SSD Condition for Application of Primer

Apply 1st Coat of Dr. Fixit Roofseal Select at the Rate of 2.0 Sqmt per Ltr

An Open 45 Gsm Glass Fibre Mesh of 2.5x2.5 mm Must be Sandwiched Between the First & Second Coat While the 1st Coat is Still Wet, Place the Fibre Mesh on it

Apply Second Coat of Dr. Fixit Roofseal Select with The Same Application Coverage Application Direction of Second Coat Should Be Perpendicular to That of the First Coat. Check To See No Void Surface Is Left Uncoated With Second Coat. Allow Second Coat To Dry For 6-8 Hours

Apply Third Coat Of Dr. Fixit Roofseal Select At An Application Direction That Is Perpendicular To That Of The Second Coat With Same Application Coverage Rate. Check To See No Void Surface Is Left Untreated & Uncoated

Smooth, Nonporous Surfaces Like Marble, Granite, Glazed Ceramic Tiles, Clay Tiles, Not Recommend for Application On Kota, Kadappa Stone, Mud Phuska Roof With Brick Tiles & Bituminous Treatment

20 L

Not Recommend for Roof Area More Than 500 Sq.mtr

Do Not Apply if Rain is Expected Within 48 Hours After Application

Do Not Apply Dr. Fixit Roofseal Select Over Expansion or Moving Joints Directly

Do Not Apply if the Surface Temperature is Greater Than 35 deg C or Below 10 deg C, or Likely to Fall Below 10 deg c During the Application or Drying Period

DRF-19

Terracotta